RedhawkPro Tools Blog
Cutting Thin-Wall Stainless Without Burning the...
Thin-wall stainless burns because the alloy will not move heat away from the cut — type 304 conducts roughly 16 W/m·K, about a third of what mild steel does, so...
Cutting Thin-Wall Stainless Without Burning the...
Thin-wall stainless burns because the alloy will not move heat away from the cut — type 304 conducts roughly 16 W/m·K, about a third of what mild steel does, so...
13,300 RPM Meets a Disc Rated Lower: How to Rea...
A cut-off wheel stays in one piece only when the RPM printed on its blotter is at or above the free-running RPM printed on your grinder's nameplate, and every other...
13,300 RPM Meets a Disc Rated Lower: How to Rea...
A cut-off wheel stays in one piece only when the RPM printed on its blotter is at or above the free-running RPM printed on your grinder's nameplate, and every other...
Which Way Does a Cut-Off Wheel Go? Rotation Mar...
A cut-off wheel goes on so that the rotation arrow printed on it matches the direction your grinder spins — on a 4-1/2" wheel rated for 13,300 RPM, that arrow...
Which Way Does a Cut-Off Wheel Go? Rotation Mar...
A cut-off wheel goes on so that the rotation arrow printed on it matches the direction your grinder spins — on a 4-1/2" wheel rated for 13,300 RPM, that arrow...
When to Retire a Diamond Blade: Segment Height ...
A diamond blade is done when the diamond segments are worn down to about the height of a nickel above the steel core — not when it stops cutting fast,...
When to Retire a Diamond Blade: Segment Height ...
A diamond blade is done when the diamond segments are worn down to about the height of a nickel above the steel core — not when it stops cutting fast,...
Gas Cut-Off Saw Maintenance: Daily Checks and S...
A gas cut-off saw needs routine checks of its air intake, fuel system, drive, water delivery and blade mounting. Concrete dust and slurry make neglected maintenance costly, but a universal...
Gas Cut-Off Saw Maintenance: Daily Checks and S...
A gas cut-off saw needs routine checks of its air intake, fuel system, drive, water delivery and blade mounting. Concrete dust and slurry make neglected maintenance costly, but a universal...
Diamond Blade Binding: How to Stop and Recover ...
A binding blade is almost never a blade problem. It's an unsupported offcut closing a kerf, and the only safe first move is to get the rim to a complete...
Diamond Blade Binding: How to Stop and Recover ...
A binding blade is almost never a blade problem. It's an unsupported offcut closing a kerf, and the only safe first move is to get the rim to a complete...