1 1

RedhawkPro 7-1/4 in. Composite Decking Saw Blade - 72T/80T TCG Carbide Circular Saw Blade for WPC Decking, Laminate & PVC Trim, 1 in. Arbor with 5/8 in. Bushing

RedhawkPro 7-1/4 in. Composite Decking Saw Blade - 72T/80T TCG Carbide Circular Saw Blade for WPC Decking, Laminate & PVC Trim, 1 in. Arbor with 5/8 in. Bushing

  • Triple-Chip Grind Built for Composite Decking:A TCG (triple-chip) tooth pattern with flat rakers shears through wood-plastic composite instead of tearing it, so deck boards and fascia trim come out with square, chip-free edges - the tooth geometry for brittle, plastic-rich material.
  • YD10G Carbide Tips Take the Hits:Impact-resistant YD10G carbide stays sharp in abrasive, mineral-filled boards and survives the hidden screws and nails you meet when re-cutting old decking during repairs.
  • 2.0 mm Thin Kerf, Cooler Running:The narrow kerf removes less material, cutting motor load on cordless circular saws and keeping heat down so the plastic binder in the board does not melt and smear across the cut.
  • Stress-Ring Body with Silencer Lines:Laser-cut stress-relief rings and silencer slots damp vibration and howl, holding the plate flat at full rpm - and plate flatness is what actually decides whether the cut is clean.
  • 1 in. Arbor with 5/8 in. Bushing Included:The blade is bored 1 in. (25.4 mm) and ships with a machined 5/8 in. (15.88 mm) bushing, so it mounts straight onto the arbor of a standard 7-1/4 in. US circular saw.
  • Blades Are Consumables - Buy the Pack:A composite deck job eats blades. The 2-pack works out about 12% cheaper per blade and the 5-pack about 20% cheaper, so a sharp spare rides on the truck instead of costing a mid-job store run.
Blade Diameter
Tooth Count
Pack Size
$44.99 USD
$44.99 USD
Sale Sold out
Shipping calculated at checkout.
  • 2-Year Warranty
  • 30 Days Money Back
  • Free Shipping
View full details

Triple-Chip (TCG) Tooth Geometry

Alternating bevelled teeth paired with a flat raker shear brittle, plastic-rich material instead of tearing it - the tooth pattern to use on composite decking, where ATB or flat-top blades leave chipped, fuzzy edges.

  • YD10G Carbide Tips

    Impact-resistant YD10G carbide stays sharp in abrasive, mineral-filled boards and shrugs off the hidden screws and nails found in older decking during repair work.

  • 2.0 mm Thin Kerf

    A narrow kerf removes less material per pass: less motor load on cordless saws, longer runtime per charge, and less heat in the cut so the plastic binder never melts or smears.

  • Stress-Ring Body and Silencer Lines

    Laser-cut stress-relief rings and silencer slots damp vibration and noise, keeping the steel plate flat at full rpm - plate flatness is what actually decides whether the cut is clean.

Sized for Composite Decking

Pitched and tempered for WPC, capped composite decking, PVC trim and fascia - materials whose mineral filler dulls a coarse 24T framing blade within a few hundred feet of cutting.

  • 1 in. Arbor, 5/8 in. Bushing Included

    Bored 1 in. (25.4 mm) and supplied with a machined 5/8 in. (15.88 mm) bushing, so the blade mounts straight onto a standard US 7-1/4 in. circular saw arbor.

  • Fits the Saws You Already Own

    Runs on handheld circular saws, table saws and miters - anywhere a 7-1/4 in. blade with a 5/8 in. effective arbor fits, no adapters to hunt down.

  • Buy the Pack, Save per Blade

    Blades are consumables. The 2-pack saves about 12% per blade and the 5-pack about 20%, so a sharp spare rides on the truck instead of costing a mid-job store run.

Explore more products and discover something new!